P0522: Engine Oil Pressure Sensor/Switch "A" Low
P0522 means Engine Oil Pressure Sensor/Switch "A" Low. The engine oil pressure sensor or switch reports oil pressure. The signal voltage is lower than the minimum the module expects. Typical causes are a short to ground, an open in the reference or signal wire, or a failed sensor.
Can I keep driving? Limit driving and diagnose promptly. Continued driving can cause damage, stalling or limp mode.
Common symptoms
- Check engine light on
- Oil pressure light or gauge behaving erratically
- On some vehicles, reduced power
Possible causes
- Failed oil pressure sensor or switch (often leaking oil)
- Wiring or connector fault
- Actual low oil pressure (range/performance)
How to diagnose P0522
- Check the oil level immediately.
- Verify real oil pressure with a mechanical gauge before replacing the sensor.
- Inspect the sensor connector, often contaminated with oil.
- Check power, ground and signal.
If the oil pressure warning light is on, stop the engine until oil pressure has been verified.
What the code means, digit by digit
Generic codes have the same definition on every OBD-II vehicle (petrol cars from model year 1996 in the US, 2001 in the EU; diesels later). Manufacturers can add their own enhanced codes; those are not listed here.
Related codes
General guidance only. Fault codes describe what the engine computer saw, not which part failed: confirm with testing before replacing parts, and follow the vehicle's service information.