P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control
P0125 means Insufficient Coolant Temperature for Closed Loop Fuel Control. The engine is taking too long to reach normal operating temperature, or does not reach it at all. The engine computer waits for a minimum coolant temperature before it switches to closed-loop fuel control using the oxygen sensors; it did not see that temperature in the expected time.
Can I keep driving? Safe to drive short-term, but have it checked to avoid failed emissions or worse fuel economy.
Common symptoms
- Check engine light on
- Temperature gauge reads lower than normal
- Heater blows lukewarm air
- Worse fuel economy
Possible causes
- Thermostat stuck open or opening too early
- Faulty coolant temperature sensor
- Low coolant level
- Cooling fan running all the time
How to diagnose P0125
- Check coolant level.
- Watch coolant temperature on a scan tool during warm-up: it should rise steadily to the normal operating range.
- Feel the upper radiator hose: if it warms up at the same time as the engine, the thermostat is likely open too early.
- Replace the thermostat with the correct temperature rating.
What the code means, digit by digit
Generic codes have the same definition on every OBD-II vehicle (petrol cars from model year 1996 in the US, 2001 in the EU; diesels later). Manufacturers can add their own enhanced codes; those are not listed here.
Related codes
General guidance only. Fault codes describe what the engine computer saw, not which part failed: confirm with testing before replacing parts, and follow the vehicle's service information.