P0119: Engine Coolant Temperature Sensor 1 Circuit Intermittent

P0119 means Engine Coolant Temperature Sensor 1 Circuit Intermittent. The engine coolant temperature (ECT) sensor tells the engine computer how warm the engine is. It affects fuel mixture, idle speed, cooling fan control and the temperature gauge. The signal drops out or jumps erratically. Intermittent faults are most often caused by loose or corroded connectors and chafed wiring rather than the sensor itself. A low voltage reads as hot; a high voltage reads as cold.

CodeP0119
SystemCooling system sensor
SeverityModerate
TypeGeneric powertrain

Can I keep driving? Drivable with care. Diagnose soon: performance, economy or other components can be affected.

Common symptoms

  • Check engine light on
  • Cooling fans running constantly (common fail-safe)
  • Hard starting or rough cold running
  • Poor fuel economy or black smoke
  • Temperature gauge reading wrong

Possible causes

  • Failed coolant temperature sensor
  • Damaged connector or wiring
  • Low coolant level leaving the sensor in air
  • Thermostat fault (range/performance codes)

How to diagnose P0119

  1. Check coolant level with the engine cold.
  2. Compare the ECT reading with the IAT reading after the car has stood overnight: they should be within a few degrees.
  3. Check the sensor connector, signal and ground.
  4. Measure sensor resistance at a known temperature against the specification.

Never open a hot cooling system. Wait until the engine has cooled down.

What the code means, digit by digit

PPowertrain0Generic (SAE) code1Sub-system19Specific fault

Generic codes have the same definition on every OBD-II vehicle (petrol cars from model year 1996 in the US, 2001 in the EU; diesels later). Manufacturers can add their own enhanced codes; those are not listed here.

Related codes

General guidance only. Fault codes describe what the engine computer saw, not which part failed: confirm with testing before replacing parts, and follow the vehicle's service information.